Configuration and Interface set up
WS4-DT/TT-r01-12.1.17-OM-RS
61
2. After your printer restarts, click Get to get its IPv6 information. If you are
using a static IPv6 address, you’ll get the same settings as it is in the
previous step; if you are using DHCPv6, the DHCPv6 server will
automatically populate the IP Address and Link-Local Address boxes
under Current IPv6.
3. In the Input/Output Port list, click LAN, and click Setting.
4. In the Setting LAN dialog box, do one of the following to configure your
IP address:
To Next Page
Loading...
