Configuration and Interface set up
WS4-DT/TT-r01-12.1.17-OM-RS
65
∙ If you’re using Open and WEP is on, choose your WEP password type in
the WEP Input Type list. Next, enter your WEP password in one of the
WEP Key box, and select the key you want to use from the WEP Key
Index list.
∙ If you’re using WPA-Personal or WPA2 Personal, enter your password in
the WPA Pre-shared Key box.
∙ If you’re using 802.1X, WPA-Enterprise or WPA2 Enterprise, choose your
EAP authentication method in the EAP Method list, and enter your
username and password in EAP User Name and EAP Password boxes
respectively. If you’re using TTLS mode, you can choose the TTLS
encryption method from the TTLS Method list.
To Next Page
Loading...
