Configuration and Interface set up
WS4-DT/TT-r01-12.1.17-OM-RS
67
6. In the Input/Output Port list, click LAN, and click Setting.
7. In the Setting LAN dialog box, do one of the following to configure your
IP address:
∙ If you are using a static IP address, in
the IP Address box, enter the IP
address under IPv4 in the WLAN tab
and click OK.
∙ If you are using a dynamic IP
address provided by DHCP, in
the IP Address box, enter the
IP address under Current IPv4
in the WLAN tab and click OK.
To Next Page
Loading...
