satoh Buck S-470D - Rear Tread Adjustments; 2-Wheel Drive and 4-Wheel Drive; Operators Seat; Tool Box

L
OPERATOR SEAT
A deluxe foam rubber operator's seat is provided on the SA70 and
S-470D. It
is adjustable in 3 stages at intervals of 28mm (1.10") to suit it
to the operator's stature.
TOOL BOX
The tool box is located under the operator's seat. To use the tool box,
turn the seat downward to the front.
REAR TREAD ADJUSTMENT
2-WHEEL DRIVE AND 4-WHEEl DRIVE
The rear tread can be adjusted by changing the left and right tires to each
other. This adjustments is appl icable to either specification - of 2-WD or
4-WD
and ES or AG tire.
2-WD and 4-WD
tread
AG Tire Standard tread
Max. tread
ES Tire Standard tread
Max. tread
Rear wheel tightening torque
740 mm (29.1 in.)
890 mm (35.0 in.)
770 mm (30.3 in.)
860 mm (33.9 in.)
8.5 ~ 9.5 kg-m (61 ~ 69 ft-Ib)
FRONT
TREAD OF 4-WHEEl DRIVE
4-wheel drive front tread is as shown below.
Front tread
AG Tire
ES
Tire
785 mm (30.9 in.)
800 mm (31.5 in.)
Axle housing and gear case
tightening torque
Front tire tightening torque
4-WD
2-WD
-17 -
6
~ 7 kg-m (43 ~ 50 ft-Ib)
8.5 ~ 9.5 kg-m (61 ~ 69 ft-Ib)
5.0 ~ 6.0 kg-m (36 - 43 ft-Ib)