satoh Buck S-470D - SECTION 3. SERVICE INFORMATION

NI
This section describes service information required for regular mainte-
nance and adjustment and also the ways to carry out these jobs.
NOTE: ________________________________________ __
When carrying out the maintenance services or adjustments, place the
tractor on as open and level ground as possible. Before removing caps,
plugs, and covers, wipe clean the surrounding surfaces so as not to allow
dust or dirt to enter the inside of the engine and the tractor.
PRECAUTIONS ON COOLING SYSTEM IN COLD WEATHER
Frozen cooling water damages the cylinder block. To avoid such il
trouble, mix antifreeze into cooling water, or thoroughly drain coolin~l
water from the cylinder block and radiator in case the tractor is stored ()I"
not used for a long time in cold wBather.
NOTE:
For details of the engine block heate,-, consult a Satoh dealer.
AI\'TIFREEZE
When adding antifreeze solution, the following rules should be observed,
otherwise, the cyli'lder block will rust.
1. This tractor's engine is of a diesel type and its cylinder block is made
of cast iron. Therefore, suitable antifreeze solution for such a cast
engine block must be used.
- 32-