EasyManua.ls Logo

satoh Buck S-470D - Fan Belt Tension Adjustment; Differential Lock Pedal Adjustment

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
fAN
BELT TENSION ADJUSTMENT
Proper
fan
belt
tension
is
1C
~
12
mm
(0.4
~
0.5
inch)
with
a
thumb
pressure
halfway
between
the
water
pump
pulley
and
alternator
pulley.
To
adjust
the
tension,
loosen
the
alternator
bracket
bolt
and
the
adjust
plate
Dolt
and
move
the
alternator
in
or
out.
After
proper
tension
is
obtained,
tighten
the
bolt
securely.
Check
the
belt
for
cracks
and
damages.
Fan
Pressure
of
about
10kg
(22Ib)
given.
DIFFERENTIAL
LOCI( PEDAL ADJUSTMENT
There
is
no
necessity
of
frequent
adjustment
of
the
differential
lock.
The
adjL'stment
was
properly
made
at
the
factory
before
shipment.
If
the
pedal
stroke
becomes
too
small
and
the
differential
lock
is
difficult
to
operate,
adjust
it
by
means
of
the
adjust
bolt.
1.
Depress
the
differential
lock
pedal fully.
2. In
this
state,
turn
the
adjust
bolt
so
that
its
head
will
contact
the
pedal.
-47
-

Table of Contents

Related product manuals