Saturn PTM23F - Controller Front Panel Commands; Controller LED Functions

5-1-2.
1. FRONT PANEL COMMANDS
To display target set point, select a parameter or confirm an operation in programming
mode.
To start a manual defrost
To view the last alarm occurrence. In programming mode, it browses the parameter
codes or increases the display value
To view the last alarm occurrence. In programming mode, it browses the parameter
codes or decreases the display value
KEY COMBINATION
To lock & unlock the keyboard
To enter in programming mode
To return to the room temperature display
1.1 Function of LEDS
35
ALd
Minimum or minimum temperature alarm delay
99
36
dAO
Delay of temperature alarm at start up
1h
37
AU2
Condenser alarm temperature
144
38
ACH
Condenser alarm differential
8
39
Ad2
Condenser alarm delay
0
40
dA2
Delay of condenser temperature alarm at start up
0
41
AC2
Compressor stop for condenser alarm
AUt
42
Pbc
Kind of probe
ntc