Saturn S Series - Page 127

Maintenance
6-24
Procedure 7
Printer Long Term Storage
Start
Long-term
Storage?
Drain out fluid
from the printer
Remove both
replenishment
bottles (make-up
and/or ink)
Clean out the ink and
make-up tank gap,
and then put them
into clean tank again.
Clean out the nozzle
manually
Shutdown the
printer to
“Printer is off”.
Switch off the
power supply.
Cover printer
and printhead.
No
Y
es
WARNING: Refer to Ink Maintenance Flow Charts
on page 6-16 before performing ink
maintenance procedures.
Figure 6-17. Printer Storage (Procedure 7)