Maintenance
6-30
Nozzle Drive Setting
Guidelines
Figure 6-24. Setting the Nozzle Drive
Figure 6-24, Setup Nozzle Driver
WARNING: Never set the nozzle drive higher than the foldback level.
This entire procedure must be repeated if a new nozzle or
ink type is introduced into the system, or if the ambient
temperature changes substantial.
0
100% Nozzle Drive
Foldback
Upper limit for good print quality
Nozzle Drive Set Point
Lower limit for good print quality
0% Nozzle Drive
Nozzle Drive Scale
To Next Page
Loading...