Saturn S300 Series - Page 129

Maintenance
6-26
Procedure 9
Change new type of ink.
Figure 6-19. Change New Type of Ink (Procedure 9)
Drain old-type
ink
Procedure 4
(Page 6-22)
Load with
old-type
make-up
Procedure 3
(Page 6-25)
Drain old-type
make-up
Procedure 4
(Page 6-22)
Replace the ink
filter, Churn
filter net, and
recovery filter
net.
If required,
replace ink
recovery tube
and makeup
filter net
Flush
Viscosimeter
Procedure 5
(Page 6-23)
Flush with
old-type
cleanings
Procedure3
(Page 6-21)
Drain old-type
cleanings
Procedure 4
(Page 6-22)
Drain new-type
make-up
Procedure 4
(Page 6-22)
Flow Time
Calibrate
Procedure 6
(Page 6-24)
Load with
new-t
yp
e of ink
Procedure 1
(Page 6-19)
W
ARNING: Refer to Ink Maintenance Flow Charts
on page 6-16 before performing ink
maintenance procedures.
Drain new-type
cleanings
Procedure 4
(Page 6-22)
Flush with
new-type
make-up
Procedure 3
(Page 6-21)
Flush with
new-type
cleanin
g
s
Procedure 3
(Page 6-21)
Load with
old-type
cleanings
Procedure 1
(Page 6-19)