Safety
2-7
Ink and Make-up Fluid Caution Items
1. Ink and make-up replenishment
While the printer is operated, the ink and make-up are automatically transferred at fixed intervals
from the ink or make-up tank to the main ink supply pipe for replenishment purposes. If the ink or
make-up sufficiency alarm is issued, add ink or make-up to the tank within 60 minutes. If such
replenishment procedure is not completed within 60 minutes, the printer comes to a stop.
2. Ink replacement
Refer to “System Maintainence”.
During printer operated, ink will polluted by dust. Long-term running will cause to badly charge
of ink. Replace the ink refer to the table as below;
Replacement periods Type Numbers
Operating hours Period
Normal black ink R1182 800-1200 hours 8 month
Low viscosity ink R1180 800-1200 hours 8 month
Invisible blue ink R1360 600-1000 hours 6 month
Alcohol endurable ink R1582 600-1200 hours 8 month
High adhesive ink R1782 600-1200 hours 6 month
White pigment ink R1000 600-1000 hours 6 month
Edible ink R1960 300-600 hours 3 month
3. Store requirement
1) The ink and make-up must be hermetically sealed and stored in a cool dark place(0 to 20 ℃)
2) Using the ink and make-up before “Unseal period”.
3) Once the ink unsealed, please use it as soon as possible, if the ink in the printer over the
time which in above table, that means the ink can not be used any more.
4) Once the make-up unsealed, please add into the ink jet printer within one year. Do not need
to change the make-up.
Caution
: Waste ink and make-up can not be poured into sewer or public places.
To Next Page
Loading...