Equipment Description and Component Identification
3-7
Component Identification
Introduction This section identifies the location and describes the function
of the main components included in the hydraulic, pneumatic,
and electronic compartments of the control unit, as well as the
main components in the printhead.
Only main printer components are covered in this section.
This section is divided into the following subsections:
Hydraulic Components - - - - - - - - turn to page 3-7
Electronic Components - - - - - - - turn to page 3-13
Printhead Components - - - - - - -- turn to page 3-15
Hydraulic Components Refer to Figure 3-5 and Figure 3-6 for the location of the main
hydraulic components, and refer to the following pages to find
a brief description of the function of the components.
Caution
: Open the lower door to check the hydraulic
components.
To Next Page
Loading...