Saturn S300 Series - Page 87

INK JET PRINTER OPERATION
5-35
System Setup
System Clock
It is used to adjust the main clock of the printer. The setup
procedures as below:
1. Enter<System Setup-1>, select <System Clock>, it displays as
below:
2. Use <Direction key> to move the select box to the position you
want to change, use left/right <Adjust key > to change or enter
the value directly.
3. Select <Ok> to confirm it.
User Password
You can set the password yourself to manage the printer preventing
from the wrong operation of the others.
Caution : If it’s the first time to set up the password, the
original password is empty. Press <Enter> is OK and insert password
twice which should be the same.
Caution : The password must be 10 bits English character at
most and case sensitive.
Status:
Printer is ready
S
y
stem Clock
2007 / 12 / 13 12:00
Saturn Technologies Co. Ltd
Current Flow Time: 4200
Ok (F1) Exit
(
F3
)
Year
Date
2007
26
Minute
00
Month
Hour
12
12
Second
23
Cancel (F2)