Special Function Instruction
Power down memory instruction
This bread maker has power down
memory function. During programming,
if suddenly power down less than 7
minutes, then power on again and still
renew the current work program; but
total working time may be changed and
no equal to original setting time.
Actual working time= power down time
+ original setting time.
If power down time excess 15minutes,
the bread maker can not ensure to
renew the current working status. If not
start programming but power down, it
will renew original power on status.
Alarm and self-shield Function
Instruction under over temperature
or abnormal
Bread maker have the function of initial
condition estimation on MENU and
self-protected on abnormal unit. If you
find unclear or abnormal using, please
refer to the following explanation to
judge and dispose in time.
1. Working condition judge function
If current working condition is not suita-
ble for initial condition requirement
on current menu. For example: when
select BREAD or DOUGH program, bread
maker inner temperature is too hot or
too cold that cannot meet initial condi-
tion requirement, that is, inner tem-
perature is lower than -10℃ or higher
than 50 ℃ ; at this time, you start to
program, bread maker will automatically
forbid working, display will show
“E00”or “E01”,meanwhile, the beeper
will sound a constant short prompt.
Under this condition, please take out the
bread pan and allow unit to wait the
suitable temperature for work. If you
still cannot use the bread maker nor-
mally, maybe have some trouble on this
unit, please contact Consumer Service
for repair or replacement.
2. Function judge function
The bread maker has auto-judge func-
tion on abnormal unit, such as tempera-
ture sensor open or short etc.
When temperature sensor open, display
will show “EEE”, meanwhile the beeper
will sound constant short prompt.
When temperature sensor short, display
will show “HHH”, meanwhile the beeper
will sound constant short prompt.
If happen such case, please contact
Consumer Service for repair or replace-
ment.
Buzzer prompting function instruc-
tion
Considering buzzer is used frequently,
here is the detailed explanation.
1. When RESET, one beeping will be
emitted.
2. When press MENU , COLOR ,
“▲”, “▼”, one time press will have
one prompt.
3. When press START/STOP , one
time press will have one prompt.
4. During JAM programming, in the
DOUGH process, beeper will sound
12times interval to prompt adding jam.
5. Working is completed, beeper will
sound 15times interval; as well, keep
warm finished, beeper will sound
15times interval.
Keep warm function explana-
tion
Considering use convenience, the bread
maker has keep warm function. When
bread or the other food is completed, if
you do not take out them in time, the
bread maker will automatically go into
keep warm cycle. Refer to process time
schedule to see which menu has a keep
warm function .
When to adjust recipes
To Next Page
Loading...