Sauder Avenue Eight 416513 - Page 12

Step 5
å
Fasten the CABINET RAILS (WW and XX) to the other
surfaces of the UPRIGHTS (D2 and E2). Use four GOLD
5/16" FLAT HEAD SCREWS (3S).
å
NOTE: The CABINET RAILS are marked "CABINET
RIGHT" and "CABINET LEFT" for easy identifi cation.
416513 www.sauder.com/servicesPage 12
D2
E2
WW
XX
Surface without
TWIST-LOCK
®
FASTENERS
Surface without
TWIST-LOCK
®
FASTENERS
Roller end
These holes must be here.
Roller end
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S