Planning, transport, installation
LASERTEC 40
Page 11
Cellar roofs, intermediate floors
In case of installation of the machine on cellar roofs, intermediate floors or
other load bearing structures:
Have a structural engineer experienced in structural dynamics determine
in a binding manner, as per DIN 4024 part 1: Flexible structures that
support machines with rotating elements,
• That the load bearing structure is able to absorb the actions of the
machine's inertial forces,
• or, if this validation cannot be provided, that the measures for
vibration damping that are then to be required are adequate.
Floor vibration
Floor vibration or shocks from neighbouring machines or other sources
must not affect the function and accuracy of the machine.
To Next Page
Loading...