Planning, transport, installation
LASERTEC 40
Page 19
Connection ratings
Machine connection:
TN-S supply with 3 conductors (L1, L2, L3) as well as neutral conductor (N)
and earth conductor (PE).
Mains connection ………………… 3N/PE~50/60 Hz …….. 400/230 V
Open cable length above floor …... m ……………………………… 0,8
Connecting cable cross-section …………… accd. to DIN 5710/VDE 0100
* Due to energy return and possible operation for short periods, currents
may occur that make the recommended mains fuse protection necessary.
In max. at
100% ED
A
Power consumption at
100% ED,
KVA
Max. fusing
A
Basic version 40 27 50
To Next Page
Loading...