Planning, transport, installation
LASERTEC 40
Page 31
Transport device
• Open laser cover.
• Install transport device no. 2406063 (already installed when machine
is delivered).
Avoid collisions with the laser under all circumstances!
Fasten all threaded elements.
• Tighten nuts.
• Place plate with crane lug (crane lug ahead on the right) on the nuts
with washers (keep distance between laser and plate).
• Mounten the nuts and tighten them.
Risk of accidents due to material breakage!
• Hang crane hook into transport device.
Risk of accidents due to toppling or material breakage!
Never lift the machine without using the transport-device no. 2406063.
Unbolting machine
Unbolt machine from the foundation; on delivery unbolt from pallet and
remove supports (transport timbers).
Close doors of the machine and secure against unintentional opening.
To Next Page
Loading...