Planning, transport, installation
LASERTEC 40
Page 65
Symbols in the lubrication schedule
Lubricate with grease resp. oil
Change filter
Maintenance interval / operating hours
See operating instructions
Lubricants
Only the use of suitable lubricants provides a safe machine operation.
For spindle nuts and guides of X, Y and Z axes, use only the following
lubricants:
• Klueber ”Isoflex NBU 15”, ident no. 27051782 (400 g cartridge)
• Turmogrease L252” ident no. 2401811 (400 g cartridge)
• Divinol ”Lithogrease 000”, ident no. 27078178 1000 ml refill tube).
No liability can be accepted in conjunction with other lubricants!
To Next Page
Loading...