Saxby Lighting Reed 10785 - User Manual

• Slideofftheendpanelasshownbelow,andslideout
thediffuser.
• Twist90degreesandremovefromslotstoremove.
• Refitbylocatingthepinsinthelampholderslots,
andtwisting90degreestoengagethepinswiththe
contacts.
• Whenchangingabulb,alwaysswitchoffatthemains
andallowthebulbtocoolbeforehandling.
• Usedbulbsshouldnotbedisposedofwithhousehold
waste.Pleaserecyclewherefacilitiesexist.Always
usethecorrecttypeandwattagebulb.Usingthe
incorrectwattagebulbwilldamagethebulband
ballast.
• Reslidethediffuserbackintoposition,andrefitthe
endpanel.
• Replacewith:10785-2x35WT5Fluorescent
Fitting/replacing bulbs
Instructionleaflet
Reed
10785
www.saxbylighting.com
Foryoursafety,alwaysswitchoffthesupplybeforechanginglightbulbs,cleaningorremovingshades.
Wasteelectricalproductsshouldnotbedisposedofwithhouseholdwaste.Pleaserecyclewherefacilities
exist.CheckwithyourLocalAuthorityorretailerforrecyclingadvice.
Recycling advice
Safety information
SaxbyLightingLtd.BH233PE
Werecommendcleaningwithasoftdrycloth.
Donotusesolventsorabrasivecleanersasthesecould
damagethefinish.
35W G5 T5
Iss.124062013

Saxby Lighting Reed 10785 Specifications