To Next PageTo Next Page
Need help?Do you have a question about the Scag Power Equipment SW36-13KA and is the answer not in the manual?
General| Engine | Kawasaki |
|---|---|
| Engine Model | FS481V |
| Engine Displacement | 603 cc |
| Fuel Type | Gasoline |
| Cutting Width | 36 inches |
| Cutting Height | 1.5 - 4.5 inches |
| Number of Blades | 2 |
| Blade Tip Speed | 18, 500 fpm |
| Deck Type | Fabricated |
| Drive Wheels | Rear |
| Fuel Capacity | 5 gallons |
| Forward Speed | 6.5 mph |
Read and understand the technical manual before operating the machine.
Follow safety instructions for safe operation while the mower is in use.
Instructions for preparing and charging the battery for electric start units.
Lay out hardware and install the handle assembly and related components.
Instructions for mounting the engine deck to specific mower models.
Procedures for adjusting the cutter deck drive belt tension and engagement linkage.
Adjustments for steering control rods and brake rods for proper operation.
Procedure for adjusting the transmission drive belt tension.
Recommended tire pressures for drive wheel and caster wheels.
General checks and adjustments for belts, steering, and brakes.
Adjusting pitch and height of the cutter deck blades.
Instructions for adjusting blade height using spindle spacers.
Maintenance schedule for the initial break-in period of the mower.
Detailed parts breakdown for the Peerless 700 transmission.
