Scag Power Equipment SWZT36-481FS User Manual (English)

Questions and Answers:

N
Nicholas GutierrezJul 30, 2025
Why is my Scag Power Equipment Lawn Mower leaving strips of uncut grass?
- J
  John Schneider DVMJul 30, 2025
  Your Scag Power Equipment Lawn Mower may be leaving strips of uncut grass due to several reasons. The blades might be dull or worn, or they might be incorrectly sharpened; in both cases, you should sharpen the blades. Other potential causes include low engine RPM (run the engine at full RPM), a slipping belt (adjust belt tension), grass accumulation under the deck (clean the underside of the deck), ground speed being too fast (slow down), wet grass (cut when dry), or bent blades (replace the blades).
H
hensonannAug 4, 2025
How to fix occasional blades of uncut grass with my Scag Power Equipment SWZT36-481FS Lawn Mower?
- T
  thomasaaronAug 4, 2025
  If your Scag Power Equipment Lawn Mower is leaving occasional blades of uncut grass, several factors could be responsible. Ensure the engine is running at full RPM. Adjust your ground speed to suit the conditions. Avoid cutting wet grass; instead, wait for it to dry. Sharpen the mower blades. Clear any accumulated grass from the underside of the deck. Finally, check and adjust the belt tension.
J
Jenna HawkinsAug 10, 2025
What to do if Scag Power Equipment SWZT36-481FS Lawn Mower cut is uneven on flat ground?
- J
  jonathan97Aug 10, 2025
  If your Scag Power Equipment Lawn Mower is leaving an uneven cut on flat ground, resulting in a wavy, high-low appearance, scalloped cut, or rough contour, consider these potential causes: a worn lift on the blade (replace the blade), the blade being upside down (mount it with the cutting edge toward the ground), grass accumulation under the deck (clean the underside of the deck), too much blade angle (adjust pitch and level), or a dull blade (sharpen the blade). For issues related to a deck mounted improperly or bent spindle area consult your authorized SCAG dealer.
B
blairmelissaAug 14, 2025
Why is my Scag Power Equipment Lawn Mower leaving a sloping ridge?
- J
  jesse71Aug 14, 2025
  If your Scag Power Equipment Lawn Mower is leaving a sloping ridge across the width of the cutting path, it could be due to unequal tire pressures (check and adjust) or uneven wheels (check and adjust tire pressure). For issues related to incorrectly mounted deck or deck not level side-to side consult your authorized SCAG dealer.
H
harristoddAug 19, 2025
How to prevent strips of uncut grass between cutting paths with Scag Power Equipment Lawn Mower?
- V
  Valerie TranAug 19, 2025
  To prevent strips of uncut grass between cutting paths with your Scag Power Equipment Lawn Mower, increase the overlap of each pass.
J
Jeffrey HardingAug 25, 2025
What causes an uneven cut on uneven ground with Scag Power Equipment Lawn Mower?
- B
  Brianna ValenciaAug 26, 2025
  An uneven cut on uneven ground with your Scag Power Equipment Lawn Mower may be due to the uneven ground itself. You might need to reduce ground speed, raise the cutting height, and/or change the direction of your cut.

Scag Power Equipment SWZT36-481FS Specifications

General

Engine	Kawasaki FS481V
Engine Power	14.5 HP
Fuel Type	Gasoline
Cutting Width	36 inches
Cutting Height	1.5 - 5 inches
Deck Type	Fabricated
Transmission	Hydro-Gear ZT-2800
Fuel Capacity	5 gallons
Turning Radius	Zero-turn

Summary

General Information

Introduction to Mower Manual

Provides an overview of the mower and the manual's scope and purpose.

Directional Reference System

Defines directional terms (left, right, front, rear) from the operator's perspective.

Engine and Drive Train Servicing Scope

Clarifies what engine and drive train servicing is covered in this manual.

Symbol Identification

Illustrates and explains graphical symbols used in the manual for clarity.

Safety Information

Operator Safety Introduction

Emphasizes operator safety and responsibility for accident prevention.

Understanding Signal Words

Explains the meaning of signal words like DANGER, WARNING, and CAUTION.

Pre-Operation Safety Checks

Lists critical checks and precautions before starting mower operation.

Safe Operation Guidelines

Provides essential guidelines for the safe operation of the mower.

Maintenance and Storage Safety

Details safety precautions required during maintenance and storage.

Spark Arrestor Requirements

Explains requirements for spark arrestors in specific geographic areas.

Spark Ignition System Compliance

Notes compliance with Canadian standards for the spark ignition system.

Safety Decals and Instructions

Identifies important safety and instructional decals found on the machine.

Specifications

Engine Specifications

Provides detailed technical specifications for the mower's engine.

Electrical System Specifications

Lists electrical system components and their technical details.

Engine Deck Specifications

Details specifications for the mower's engine deck and drive system.

Cutter Deck Specifications

Specifies dimensions, construction, and components of the cutter deck.

Weights and Dimensions

Lists the physical dimensions and weight of the mower.

Mowing Productivity Estimates

Estimates mower productivity based on cutting width and speed.

Operating Instructions

Controls and Instruments Overview

Identifies and explains the function of all mower controls and instruments.

Safety Interlock System Function

Describes the mower's safety interlock system and its operation.

Initial Run-In Procedures

Outlines recommended procedures for the first hours of mower operation.

Engine Starting Procedure

Provides step-by-step instructions for starting the mower engine.

Ground Travel and Steering Operation

Explains how to operate the ground travel and steering controls.

Engaging Cutter Blades

Details the procedure for engaging and disengaging the mower deck drive.

Sloped Terrain Operation Safety

Provides essential safety advice for operating the mower on slopes.

Mower Parking Procedure

Describes the correct procedure for safely parking the mower.

Post-Operation Tasks

Lists essential tasks to perform after operating the mower.

Clearing Clogged Material Safely

Provides safety instructions for clearing clogged material from the mower.

Moving Mower Without Engine

Explains the procedure for moving the mower when the engine is stopped.

Mowing Recommendations

Offers tips for optimal mowing performance and lawn appearance.

Adjustments

Parking Brake Adjustment Procedure

Details how to adjust the parking brake for proper function.

Transmission Neutral Adjustment

Explains how to adjust the transmission neutral setting.

Neutral Latch Adjustment

Describes how to adjust the neutral latch for steering controls.

Mower Tracking Adjustment

Provides instructions for adjusting the mower's tracking.

Throttle and Choke Adjustments (Dealer)

Notes that throttle and choke adjustments are dealer-performed.

Drive Belt Adjustment and Inspection

Covers checking and adjusting drive belts for alignment and wear.

Drive Belt Alignment Importance

Explains the importance of belt alignment for mower performance.

Cutter Deck Adjustment Procedures

Details procedures for adjusting cutter deck level, pitch, and height.

Electric Clutch Air Gap Adjustment

Explains how to adjust the electric clutch air gap for proper operation.

Maintenance

Maintenance Service Intervals Chart

Provides a schedule for routine maintenance tasks based on operating hours.

Lubrication Points and Intervals

Details lubrication points and intervals for various mower components.

Hydraulic System Maintenance

Covers checking and changing the hydraulic system oil and filters.

Engine Oil Service Procedures

Explains how to check and change the engine oil and filter.

Fuel System and Refueling Safety

Provides instructions for safely refueling the mower's fuel tank.

Engine Air Cleaner Maintenance

Details how to clean and replace the engine air cleaner element.

Cutter Blade Service

Covers inspection, sharpening, and replacement of cutter blades.

Tire Pressure Check Schedule

Specifies the importance and schedule for checking tire pressure.

Illustrated Parts List

Approved Attachments and Accessories

Lists approved attachments and accessories for the mower.

Related product manuals

Scag Power Equipment SWZT36-14FS

67 pages

Scag Power Equipment SWZT48-15FS

Scag Power Equipment SWZ Series

20 pages

WALK-BEHIND SWZ-19KAI

92 pages

Scag Power Equipment SWM-52

28 pages

Scag Power Equipment SW32-13KA

28 pages

Scag Power Equipment SW36-13KH

28 pages

Scag Power Equipment SW32-14BV

24 pages

Scag Power Equipment SWZT36-481FS User Manual

Table of Contents

Questions and Answers:

Scag Power Equipment SWZT36-481FS Specifications

Summary

General Information

Introduction to Mower Manual

Directional Reference System

Engine and Drive Train Servicing Scope

Symbol Identification

Safety Information

Operator Safety Introduction

Understanding Signal Words

Pre-Operation Safety Checks

Safe Operation Guidelines

Maintenance and Storage Safety

Spark Arrestor Requirements

Spark Ignition System Compliance

Safety Decals and Instructions

Specifications

Engine Specifications

Electrical System Specifications

Engine Deck Specifications

Cutter Deck Specifications

Weights and Dimensions

Mowing Productivity Estimates

Operating Instructions

Controls and Instruments Overview

Safety Interlock System Function

Initial Run-In Procedures

Engine Starting Procedure

Ground Travel and Steering Operation

Engaging Cutter Blades

Sloped Terrain Operation Safety

Mower Parking Procedure

Post-Operation Tasks

Clearing Clogged Material Safely

Moving Mower Without Engine

Mowing Recommendations

Adjustments

Parking Brake Adjustment Procedure

Transmission Neutral Adjustment

Neutral Latch Adjustment

Mower Tracking Adjustment

Throttle and Choke Adjustments (Dealer)

Drive Belt Adjustment and Inspection

Drive Belt Alignment Importance

Cutter Deck Adjustment Procedures

Electric Clutch Air Gap Adjustment

Maintenance

Maintenance Service Intervals Chart

Lubrication Points and Intervals

Hydraulic System Maintenance

Engine Oil Service Procedures

Fuel System and Refueling Safety

Engine Air Cleaner Maintenance

Cutter Blade Service

Tire Pressure Check Schedule

Illustrated Parts List

Approved Attachments and Accessories

Related product manuals