IDENTIFY THE SB-75 COMPONENTS
Your new ScaleBlaster SB-75 unit includes the following components:
1.) One (1) SB-75 power unit
(for indoor installations only)
2.) One (1) AC adapter - 120 volt class,
UL approved transformer with 5-
volt DC output, use only Clearwater
Enviro Tech part # CET-0978
3.) Signal Cable (46’) and four (4) nylon
cable ties
4.) Warranty Card
5.) Extended Warranty Card
6.) Installation & operation manual
1.)
2.)
3.)
6.)4.) 5.)
– For indoor use only –
The ScaleBlaster unit can be installed on a horizontal or
vertical Copper, PVC, CPVC and/or PEX pipe
If a magnet will stick to your incoming water line, you have galvanized
pipe. In this case, you will need to replace a small section of pipe, about
10-11 inches, with either pvc or copper pipe.
.
2
To Next Page
Loading...