Error messages and malfunctions
Display Cause Rectification
replace waterfilter
(sTxt-196)
-
The programmed water quantity has flowed
through the filter. The control unit has acti-
vated the display message
Products can still be dispensed.
- The water filter must be replaced.
- If you do not have a replacement water
filter, contact a manufacturer-authorised
customer service representative.
system error
(fix-013)
- Programming error
Products can still be served.
- You can temporarily remove this message
by pressing the [RESET] button.
- Contact a manufacturer-authorized cus-
tomer service representative immediately.
temp. probe coffee
(sTxt-184)
- The temperature sensor in the instant
heater of the left beverage outlet for hot
water is defective.
Left espresso outlets are disabled.
- Contact a manufacturer-authorised cus-
tomer service representative.
temp. probe steam
(sTxt-177)
- The temperature sensor in the steam gen-
erator is defective.
Steam discharge is blocked.
- Contact a manufacturer-authorised cus-
tomer service representative.
watertank empty
(sTxt-188)
- Only for espresso machines without a fixed
drinking water connection.
The espresso machine is blocked.
- Fill up the fresh water container with drink-
ing water and then press [RESET].
Page 6-6 BASO-1 SUSA - 02.06 - V01 - V02
To Next Page
Loading...
