7
2019-03-06 / V1.0
Contactors CT/CU Series – Installation and Maintenance Instructions
Dangers and security measures
DANGER
Interventions in the equipment may cause serious impairments to the safety of men and construc-
tions. They are not permissible and lead to an exclusion of liability and warranty.
DANGER
All checks and the raplacement of components or groups of components may only be carried out by
qualied personnel according to the instructions of Schaltau. All spare parts must be parts delivered
by or released by Schaltbau..
3.2 Other dangers
WARNING
Exclusively use the contactors for purposes as indicated in the specications and data sheets.
A wrong application can cause accidents and severe damages to persons!
X
The manufacturer doesn‘t take the responsibility for accidents which were caused by improper
use of the product.
WARNING
The contactor is heavy. Risk of injury and damage to the device.
X
Take care when handling the contactor.
X
Always two persons should be available when unpacking and carrying the contactor.
X
When carrying the contactor always hold it on the base plate.
X
Do not carry the contactor by holding it at the upper module.
CAUTION
The contactors may grow warm during operation and they may become hot depending on the am-
bient temperature and the conditions of use. Risk of burns!
X
Before beginning any work on the contactors make sure that the heated components have
cooled down.
CAUTION
The contactors contain sharp-edged parts. Risk of injury!
X
Use appropriate tools for installation and maintenance works on the contactors.
X
Wear protective gloves when working with sharp-edged components.
To Next Page
Loading...