Schecter Solo-6 Custom - Solo-6 Custom Guitar Specifications; Neck and Pickup Specifications; Bridge Pickup Characteristics; Neck Pickup Characteristics

c
d
a
b
radius
Scale Length: 628mm/24.75”
A: Width at Nut- 42mm
B: Width at Last Fret- 56mm
C: Thickness at 1st Fret- 20mm
D: Thickness at 12th Fret- 22mm
Radius: 355mm/14”
Solo-6 Custom
Neck Specs:
Bridge Pickup
Name:
Model No:
Construction:
Magnet:
Description:
Seymour Duncan Custom Custom
SH-11
Humbucker
Alnico II
Output:
14.4k
The Custom Custom is the SH-5
Duncan Custom humbucker with
an Alnico II magnet for warm and
smooth highs, more midrange, and
a spongier bottom end than the
SH-5. It's a good choice for players
who need a traditional vintage tone
with increased output.
Neck Pickup
Name:
Model No:
Construction:
Magnet:
Description:
Seymour Duncan ‘59
SH-1N
Humbucker
Alnico V
Output:
7.43k
Late-'50s, vintage-correct,
humbucker sound. Warm and
crystalline clean tones. Full and
bright distorted tones. Smooth
sustain. Classic appointments
include plain enamel wire, long
legged bottom plate. Compared
to the SH-55 Seth Lover, the '59
has slightly more scooped mids
and is vacuum wax potted for
squeal-free performance.
Strings
6-String Guitar*
Tuning: E-A-D-G-B-E
Gauge: .046-.036-.026-.017-.013 .010
(EB Regular Slinky #2221)
*Changing to different string gauges and/or
alternate tunings may require minor neck/bridge
adjustments for optimal performance. For Schecter
setup tips refer to Schecter Setup Guide.