4.1 About BIOS Setup
4.1.1 When to Use BIOS Setup ?
You may need to run the BIOS Setup when:
・An error
message appears
on the screen during the system
booting up and is requested to run SETUP.
・You want to change the default settings for customized
features.
・You want to reload the default BIOS settings.
4.1.2 How to Run BIOS Setup ?
To run the BIOS Setup Utility, turn on the notebook and press
the [Del] key during the POST procedure.
If the message disappears before you respond and you still wish
to enter Setup, either restart the system by turning it OFF and
ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this
chapter are for your references only.The actual setting screens
and options on your Notebook may be different because of BIOS
update.
The setup function only can be invoked by pressing [Del] or
[F2]
key during POST that provide a approach to change some
setting and configuration the user prefer, and the changed
values will save in the NVRAM and will take effect after the
system rebooted. The setup uses a menu interface to allow the
user to configure their system and the features are briefly listed
as follow.
Press [F7] key for Boot Menu.
NOTE
: The
drivers, BIOS
and
utilities bundled
in the
support
DVD
may vary by
models
and are
subject
to
change without
notice.
To Next Page
Loading...
Need help?
General
