To Next Page
S
Sarah MartinezAug 2, 2025
Why is the vacuum level not reached, or vacuum created too slowly in Schmalz Accessories?
- MmichaelgonzalezAug 2, 2025
If the vacuum level isn't being reached or vacuum is being created too slowly in your Schmalz Accessories, here are a few things to check: * The silencer might be soiled, in which case you should replace it. * There could be a leakage in the hose line. Check the hose connections. * There might be a leakage on the suction pad. Check the suction pad. * The operating pressure could be too low. Increase the operating pressure, but stay within the maximum limits. * The internal diameter of the hose line might be too small. Refer to the recommended hose diameters.
General