What to do if my SCHUBERTH Intercom System SRC-System™ stops responding?
If your SCHUBERTH Intercom System stops responding, reset it by turning it off and then on again. To do this, press the power button for 2 seconds.
How to delete all paired devices on SCHUBERTH SRC M1 Intercom System?
To delete all paired devices on your SCHUBERTH Intercom System, follow these steps: From Standby mode, press button A for 5 seconds until the LED flashes RED/BLUE. Then, press button A for 2 seconds until the LED flashes 5 times in PURPLE.
General| Brand | SCHUBERTH |
|---|---|
| Model | SRC M1 |
| Category | Intercom System |
| Language | English |
Describes how to attach the SRC-System™ to a helmet.
Details basic operations like Power ON/OFF, Volume, Mute, and VOX.
Explains the meaning of different LED light patterns for status indication.
Defines the priority of audio playback from connected devices.
Configures hands-free operation sensitivity for key functions.
Details compatibility with other Schuberth and scala rider intercom models.
Step-by-step guide for pairing two intercom units for communication.
Instructions on how to initiate intercom calls with paired units.
Explains how intercom calls are received from other riders.
Describes the busy signal when attempting to establish an intercom call.
Explains the spontaneous intercom feature for connecting without pre-pairing.
Guides pairing Bluetooth devices like phones, GPS, and MP3 players.
Procedure to delete all previously paired devices from the unit.
Instructions for managing phone calls, including answering and ending.
Details how to play music from A2DP compatible Bluetooth devices.
To Next Page
