Schüco DCS - Schüco Door Control System (DCS) Overview

Schüco de
Commissioning instructions – Schüco DCS Touch Display 5
Dok-Nr.10000432116_01
Contents
8 1. Notes on this document
8 1.1. Target groups and qualications
8 1.2. Handover of the document
8 1.3. Retention of the document
9 2. Security
9 2.1. About the safety instructions
9 2.2. Laws, regulations and technical rules
10 2.3. Proper use
11 2.4. General safety instructions
12 3. Contents of delivery, transportation and storage
12 3.1. Contents of delivery for Schüco DCS Touch Display
12 3.2. Contents of delivery for Schüco IP secure connector
12 3.3. Transportation and storage
13 4. Technical data
13 4.1. Schüco DCS Touch Display
15 4.2. Schüco IP secure connector
16 5. System overview
16 5.1. Overview of system components
17 6. IP secure connector
18 6.1. Overview of IP secure connector
20 6.2. Connections for Schüco IP secure connector
22 6.2.1. Conguration of „OUT2“ on IP secure connector
23 7. DCS Touch Display
24 7.1. Overview of DCS Touch Display
25 7.2. Connections to Schüco DCS Touch Display
26 7.2.1. Connection to lock technology
26 7.2.2. Dismantling
29 8. Screen surface
30 8.1. Start screen
31 8.2. Doorbell list
33 8.2.1. Making a call
34 8.2.2. Ending a call
34 8.3. Entering the access code
37 8.4. Conguration
38 8.4.1. Error messages
39 8.4.2. Network
41 8.4.3. Audio
42 8.4.4. Screen
43 8.4.5. Alarm
44 8.4.6. Language
45 8.4.7. Test
48 8.4.8. Cleaning the display
48 8.4.9. IP secure connector
50 8.4.10. Remote maintenance
51 8.4.11. Close conguration
52 8.5. Aktion auswählen
53 8.6. Symbols