Schüco DCS - C5 Türkommunikation Door communication; Simple door communication solution

Schücode Commissioning instructions – Schüco DCS Touch Display
8
Dok-Nr.10000432116_01
1. Notes on this document
1.1. Target groups and qualications
This document is intended for qualied personnel, such as trained tters and electricians.
Before installing and commissioning, read through this document thoroughly and adhere to the
specied sequence of the instructions. Schüco International KG shall not be liable for any damage
which arises from a failure to adhere to these instructions.
Qualied personnel are people who know how to assemble, install, commission, test and operate the
product and who have the relevant qualications, e.g. who have been trained and instructed in
accordance with safety regulations on the maintenance and use of appropriate safety equipment and
who have received training in First Aid.
Experts are people whose training and experience means that they have sufcient knowledge of
power-operated windows, doors and gates and the corresponding electrical installations.
They are familiar with the relevant accident prevention regulations, government Health & Safety
regulations, guidelines and generally recognised technical regulations so that they are qualied to
judge the occupational safety of power-operated windows, doors and gates and the corresponding
electrical installations.
1.2. Handover of the document
After commissioning, hand over all the documentation pertaining to this product to the end customer.
Make them aware of the safety instructions, to which they must pay particular attention.
1.3. Retention of the document
This document is a component of the product. Keep this document in an accessible place even after
installation and commissioning, so that the information is always available.