Optical port, communications
and test mode LED
User-defined site information
Menu pushbuttons for alternate
display and settings
Programmable LCD
Enable LED
Programmable local-
control button
Potential LEDs
Programmable LEDs
Figure 1. Front-panel layout
Making Electric Power Safer, More Reliable, and More Economica
l
®
SEL-734 Advanced Metering System
Quick-Start Guide
I. Introduction
This Quick-Start Guide explains how
to install, configure, test, and operate
the SEL-734 Advanced Metering System.
For detailed information on these topics,
please refer to the SEL-734 Advanced
Metering System Instruction Manual
located at www.selmeters.com.
II. SEL-734 Overview
This section outlines essential
installation information, including
front-panel layout, rear-panel layout, labels, and dimensions.
A. Front-Panel Layout
The front-panel interface consists of three programmable LEDs, an LCD, a seven-button keypad, and an
optical communications port.
Courtesy of NationalSwitchgear.com
To Next Page
Need help?
General
