Need help?Do you have a question about the Schweizer SGS 2-33 and is the answer not in the manual?
Overview of the SGS 2-33 sailplane, its construction, dimensions, and flight controls.
Details hydraulic brake installation and bleeding procedures.
Details ratchet-lock trim system operation and maintenance.
Illustrates cockpit layout and labels key instruments and controls.
Covers precautions, cautions, and procedures for winch or auto towing.
Details best gliding speeds, minimum sinking speeds, and flight limits.
Explains spin behavior, stall characteristics, and spiraling in thermals.
Discusses adherence to placard weights and CG limits.
Guides pilots through landing pattern, speeds, and touchdown techniques.
Explains the typical landing pattern and necessary airspeed adjustments.
Details how dive brakes affect glide path and landing approach.
Provides instructions for safe touchdown and controlling the aircraft after landing.
Provides guidance for handling the aircraft in strong winds.
Details recommended procedures for securing the sailplane on the ground.
Outlines critical airspeed limits, placarding, and the flight envelope.
Interprets the flight envelope graph for safe maneuvering and gust conditions.
Details the procedure for determining aircraft weight and center of gravity.
Provides datum, MAC, and graphs for weight and balance compliance.
Presents performance curves for solo and dual flight conditions.
Step-by-step guide to assembling the sailplane, from trailer to final components.
Procedures for removing the sailplane from its trailer and initial component assembly.
Details attaching wings, struts, stabilizer, elevator, fin, and rudder.
Covers general maintenance guidelines and lubrication points.
Details lubrication points, schedule, and visual guides for maintenance.
Covers rigging of controls, fuselage leveling, and tow hook inspection procedures.
Comprehensive checklist for preflight inspections of all aircraft systems.
Continues the preflight inspection checklist with specific component checks.
Specific inspection points for major maintenance intervals across aircraft groups.
Inspection of fuselage fabric, landing gear, wheels, and brakes.
Inspection of tail surfaces, wings, control surfaces, and their components.
Inspection of tow hook, cabin instruments, panel, seats, and related systems.
Recommended procedures for securing the sailplane against wind and ground handling.
Details specifications, limits, and certification data sheet information.
Details airspeed limits, CG range, and control surface movement limits.
Outlines production basis, required equipment, and important advisory notes.
To Next Page
General