Schwing SP 750-18 - Concrete Pump Specifications

17
Specications
SP 750-15 / 750-18 / 1000 / 1250 Operation Manual
Concrete Pump Specications
SP 500
Concrete Pumpkit 80/50 x 1000:150
Concrete Valve Long Rock
Maximum Strokes/minute 32.5
Maximum Concrete Volume 45 cu. yd
3
/hr 35 cu. m
3
/hr
C4.4 Tier 3 - Diesel Motor 80 hp 60 Kw
C3.4 Tier 4 - Diesel Motor 74.5 hp 55.5 Kw
Electric Motor 75 hp 56 Kw
Output - Hydraulic Pumps 65 gpm 240 L/min
Hydraulic Pumps RPM- Diesel 2200 rpm
Hydraulic Pumps RPM- Electric 1800 rpm
Maximum Hydraulic Pressure 3872 psi 267 bar
Maximum Pressure on Concrete 1100 psi 75.8 bar
Maximum Aggregate Size 1.5” 38.1 mm
Pumping Cylinder Diameter 6” 152.4 mm
Stroke Length 39“ 990.6 mm
Di󰀨erential Cylinder Diameter 3” 80 mm
Charging Hopper Height 50.5” 1280 mm
Fuel Tank Capacity 33.5 gal. 127 L
Hydraulic Tank Capacity 53 gal. 200 L
Gross Weight N/A N/A
Length 186” 4712 mm
Width 72” 1833 mm
Height (Tier 3) 82” 2080 mm
Height (Tier 4) 88” 2226 mm
Remote Control Cable Length 100’ 30.5 m
* Max RPM of the hydraulic pumps is calculated while the pump is under a full load. Depending on the unit it is ac-
ceptable for the max RPM to vary slightly from the published estimate.