Schwing SP 750-18 - Engine Codes Screen; PLC I;O Screen; Operator Keypad Screen; Radio Remote Screen

47
Overview
SP 500 / 750-15 / 750-18 / 1000 / 1250 Operation Manual
Engine Codes Screen
Displays engine code faults using two diagnostic mes-
sage screens, DM1 and DM2.
- Use the to scroll through the engine codes.
- Press
esc
to return to the Menu screen.
Press the F4 function button under DM2 to go to the
diagnostic message screen 2.
On SP500/750-15 Tier 3 machines,
engine fault codes will not be dis-
played.
esc
DM2
SPN: 0
FMI: 0
OC: 0
0 of 0
DM1 ENGINE
PLC I/O Screen
Displays the electronic input and output signals. This
screen can be used to assist in troubleshooting electri-
cal issues.
- Press
esc
to return to the Menu screen.
esc
I00
I01
I02
I03
I04
I05
I06
I07
I08
I09
I10
I11
I12
I13
I14
I15
Q00
Q01
Q02
Q03
Q04
Q05
Q06
Q07
Q08VBBs:
22362
VBBo:
22362
VBBr:
22387
Vref:
16
Q09
Q10
Q11
Q12
Q13
Q14
Q15Test
INPUTS / OUTPUTS
6
11
Operator Keypad Screen
Displays active functions on the Operator Keypad.
Green dot = connected, Red dot = not connected.
- Press
esc
to return to the Menu screen.
esc
Operator Panel Keypad
A
ACC2ACC1
ACC3
Radio Remote Screen
Displays active functions on the optional Radio Remote.
- Press
esc
to return to the Menu screen.
esc
Radio Remote
A
ACC2ACC1
Cable Remote Screen
Displays active functions on the Cable Remote
- Press
esc
to return to the Menu screen.
esc
Cable Remote
A
ACC2ACC1