Schwing SP 750-18 - Stroke Limit Settings Screen; Language Screen; Machine Options Screen

49
Overview
SP 500 / 750-15 / 750-18 / 1000 / 1250 Operation Manual
Stroke Limit Settings Screen
Used to change the parameters of the Stroke Limiter.
From this screen you can change the Minimum Cur-
rent (MIN CURRENT) and the maximum current (MAX
CURRENT). Settings are in milliamps.
- Use the to move the between the MIN
CURRENT and MAX CURRENT settings.
When the icon appears next to the parame-
ter you would like to change, use the to
increase or decrease the parameter setting.
- Press
esc
to return to the Menu Screen
esc
Stroke Limit
MIN CURRENT
MAX CURRENT
110 mA
12000 mA
Language Screen
Used to change the current language of the HMI screens
- Use the to move the through the list of
languages.
- Press
esc
to return to the Menu Screen
esc
Language Select ENGLISH
Language
Machine Options Screen
Used to enable functionality of any installed options. As
options are added, you must select the added option
from the menu in order to enable them.
- Use the to move the between the
option settings. When the icon appears next to
the setting you would like to add, press the
ok
to turn the setting on or o󰀨.
- Press
esc
to return to the Menu Screen
ok
esc
Stroke Counter
Low Oil Level
Fuel Level
Oil Cooler Continuous On
Auto Greaser
Proportional Oil Cooler
Automatic Agitator
ACC 1
ACC 2
Machine Options
2