Schwinn MPower - Troubleshooting Advanced Issues; Battery and Interference Fixes; Calibration and USB Error Resolution; Sensor and Module Connection Issues

BatterylowonConsoleorSpeedSensor
DoaBatteryLevelcheck.
E03
InterferencefromtheadjacentareaTurnoffanytelevision,AMradio,microwave,or
computerwithin6feet(2meters)ofthebike,ormove
thebike.
BatterylowonConsoleorPowerSensor
DoaBatteryLevelcheck.
E04
InterferencefromtheadjacentareaTurnoffanytelevision,AMradio,microwave,or
computerwithin6feet(2meters)ofthebike,ormove
thebike.
E05
BaseSystemFrictionCalibrationwasnotdone.GotoServiceModemenu,C--submenu,C03option,
anddoBaseSystemFrictionCalibration.
E06
SpinDownCalibrationwasnotdone.GotoServiceModemenu,C--submenu,C02option,
anddoSpinDownCalibration.
E07
TiltSensorCalibrationwasnotdone.GotoServiceModemenu,C--submenu,C01option.
CallNautilusCustomerCare.
E08
TiltSensorCalibrationisincorrectoroutofdate.GotoServiceModemenu,C--submenu,C01option.
CallNautilusCustomerCare.
E09
USBdisabledduetolowbatteryReplaceConsolebatteries,andgotoServiceMode,U--
submenu,U02option.
E10
NosignalfromPowerSensorChangetheBrakepositionandpedalthebikeforafew
secondstoturnonthePowerSensor.
E11
NotenoughdifferencebetweenFullUpPositionandFull
DownPositioncalibrations
DoFullUpPositionand/orFullDownPositioncalibration
again.
E12
EEPROMerror
Removetheconsolebatteriesandinstallthemagain.If
thatdoesnotwork,callNautilusCustomerCare.
E13
PowerSensorispairedtothewrongSpeedSensor.
DotheDevicePairingprocedureagain.
E14
Consolewirelessmodulenotabletotransmit/receiveReplaceconsole.CallNautilusCustomerCare.
27 27
27