368
5-1. Essential information
tC_OM_OM21054U_(U)
Emergency towing procedure
Take out the towing eyelet. (P. 392)
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body as shown in the
illustration.
Insert the towing eyelet into the
hole and tighten partially by
hand.
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
Securely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
STEP
1
STEP
2
STEP
4
To Next Page
Loading...
