Steering bar and child seat adjustment
Steering bar height adjustment Seat installation and removal
First open the quick release handle and rotate the loose
nut. Adjust the direction lever to the appropriate height
according to your height. After the adjustment is completed,
tighten the nut and lock the quick release handle.
When adjusting the steering bar, care should be taken not
to expose the safety marking line of the directional tube riser.
Installation: Pick up the seat, first insert the slot
behind the seat into the bracket behind the seat,
pull the bar under the seat, and insert the groove in
the front of the seat into the bracket in front of the
seat. The small bracket can be adjusted forward and
backward. Seat position.
Disassembly: Pull the bar under the seat and lift
the seat up to remove the seat
To Next Page
Loading...