SCOPE COMMUNICATIONS UK LTD
PAGETEK PRO MK2
Ref: PTPROMK2INSTALLred Page 23 of 27 Issue 1
System Specification
Mains Input: 90-230V ac @ 50-60 Hz
Mains Power Consumption: 10W max
System Operating Voltage: 14.2V dc
System Power Consumption: less than 70mA standby, 1.2A transmit.
Transmitter:
RF Power output: Not exceeding 2W ERP
Frequency Range: 459.050, 459.100, 459.225, 459.275 MHz
Channel Spacing: 12.5 or 25 KHz
Adjacent Channel: better than 200nW @ 4.5 KHz deviation
TX Baud Rate: 512 (default) or 1200 baud
General:
Ports: 4 x dry contact n/c inputs (3 x Fire, 1 x Fault)
1 x Common Fault n/o relay contact output
COM1: RS232 serial port
Battery Backup Supply: 12V 18Ah sealed lead acid battery (not supplied)
[internal mounting kit, cable assembly and fuse is supplied fitted]
System Conformity: Radio Equipment Directive 2014/53/EU
ROHS Directive 2011/65/EU
EN 300 224 (On-Site Radio Paging)
EN 60950 (Safety)
EN 301 489 (EMC)
Additional EMC requirements of BS 5839-1: 2013.
Compliant with BS 5839-1: 2013, para. 18 and Annex C.
Footprint: (H) 380* x (W) 320 x (D) 110 mm
Wall mounting centres: (H) 344 x (W) 220 mm. Hole Dia. 4.75mm
[*840 mm with 3/4UHF antenna]
Scope’s policy is one of continuous development and specifications are subject to change without prior notice. E & OE.
To Next Page
Loading...