Cable
Routing
1. Sit in passenger seat.
2. Gently pull down the edge
of
the fabric along the
top
edge
of
the windshield just wide enough
to
hide the power cable
behind. If needed, use the provided pane/trim tool.
3. Push the cable behind the headliner towards the
door
opening.
Note: The power cable is designed with over-molded
headliner retention balls
to
help secure the cable in place.
This installation method is meant only for vehicles
in
which curtain airbags are NOT
installed
in
the window frame. This method CANNOT
be
used in vehicles equipped with
curtain airbags. Hiding, tucking
or
installing the wiring
of
your dash cam by this method
could interfere with your vehicle's curtain airbags and can be extremely dangerous. If
you are unsure about the location
of
your vehicle's airbags, DO NOT use this method for
the aforementioned reasons.
To Next Page
Loading...