Need help?Do you have a question about the Scotsman AC Series and is the answer not in the manual?
Checking carton box and wooden base conditions before removing tape and carton.
Visually inspecting exterior and removing items like water tubes, leg kit, and sanitizing bag.
Removing adhesive tapes securing the curtain and spray platen to the water sump.
Checks for data plate, wiring, environmental, water, and airflow requirements.
Procedure for leveling the ice machine using adjustable legs.
Proper electrical plug installation, voltage limits, and water inlet/drain connections.
Schematics for air-cooled and water-cooled models, showing connections.
Opening water tap, switching on power, and pushing the green start button.
Explains water filling phase and identifies components active during freezing.
Components active during harvest, dip switch settings for timing, and defrost extension.
Explains the function of various LEDs (Power, Freezing, Bin Full, Alarm) on the PC Board.
Diagrams of the refrigerant system during freeze and harvest cycles.
Water flow diagrams for AC 106, AC 126-176, and AC 206-226 during cycles.
Explanation of master, alarm/reset switches, and their related indicators.
How high temps, dirty filters, or sensor failures trigger alarms or machine shutdown.
Overview of PC board components, DIP switches, and jumper functions.
Defines timing parameters (T1, T2, Ta, Ts) and their control via PC board and DIP switches.
Identifies specific PC board alarms for temperature, sensors, and control failures.
Lists essential tools for cleaning the water system, including screwdrivers, gloves, and brushes.
General| Type | Ice Maker |
|---|---|
| Storage Capacity | Varies by model |
| Refrigerant | R404A |
| Voltage | 208-230V or 460V |
| Phase | 1 or 3 (Varies by model) |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page
