Name: SCOTT ASPECT 940
Brand: SCOTT
Rating: 5 (1 reviews)

To Next Page

To Previous Page

ENGLISH

| 54

OWNER’S MANUAL 2021 | ROAD BIKE

With an unapplied brake the brake pads should not be too close to the rim

sides, otherwise they could drag along the rim during riding. Before making this

adjustment, observe the notes in the chapter “Brake lever reach adjustment on

SCOTT road bikes and SCOTT cyclo-cross bikes”.

With ongoing brake pad wear, the pressure point at the brake lever moves to-

wards the handlebars. Check the free travel at regular intervals; it should not be

longer than a quarter of the whole travel. For readjustment turn the knurled nut

or bolt (d) through which the cable runs into the brake body until the lever has

the desired travel. Test the brakes subsequently in a place free of traffic.

WARNING

Always test the brakes’ function when stationary after adjusting them, mak-

ing sure the brake pads engage fully with the rim without touching the tyre

when you pull them hard. Make sure you cannot pull the lever all the way to

the handlebars.

Questions and Answers:

Need help?

Do you have a question about the SCOTT ASPECT 940 and is the answer not in the manual?

SCOTT ASPECT 940 Specifications

General