EasyManua.ls Logo

SCOTT EYEWEAR - Page 4

SCOTT EYEWEAR
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 ENGLISH
ENGLISH
EYEWEAR
I INTRODUCTION
Congratulations on choosing this quality SCOTT product. Before use, please
read the following instructions carefully and keep these instructions in safe
custody. This specific product line has been developed to offer you the best
comfort and fit.
SCOTT Sports SA shall not accept any complaints arising from using the prod
-
uct for other purposes than that indicated in the present information notice,
nor shall they be liable for any damages and / or losses due to improper use.
II LEGAL REQUIREMENTS
This SCOTT product is considered to be an item of Personal Protective Equip-
ment (PPE) of Category I and as such is subject to the requirements laid down
by the Regulation (EU) 2016/425 and Regulation (EU) 2016/425 as brought
into UK law and amended.
RELEVANT HARMONIZED STANDARDS
This product meets the testing
and technical requirements set out by the standard EN ISO 12312-1:2013.
III INTENDED USE AND LIMITATIONS
A RISK AGAINST WHICH THE PPE IS SUPPOSED TO PROTECT
SCOTT
sunglasses and their accessories are not designed to withstand impacts from
hard or sharp objects. They are personal protective equipment designed to
guarantee protection from harmful UV rays.
B MISUSES
These SCOTT sunglasses are not suitable for protection against
direct observation of the sun, nor artificial light sources e.g. solaria. This prod
-
uct is not a toy .
C PERFORMANCE RECORDED
This SCOTT product has been tested to
perform according to the below transmission table.
TINT CATEGORY SYMBOL TRANSMISSION
DESCRIPTION
S0 80% – 100%
Clear or slightly tinted
(clear lens)
S1 43% – 80%
Light filter
(illuminator lens)
S2 18% – 43%
Medium universal filter
(enhancer lens)
S3 8% - 18%
Dark filter
(solar blocker lens)
S4 3% - 8%
Very dark filter