To Next PageTo Next Page
Need help?Do you have a question about the Scotts LCS31662S and is the answer not in the manual?
Essential personal protective equipment and safe operating conduct.
Keep body parts away from the chain and maintain control during operation.
Proper hand placement and grip for effective control of the chain saw.
Wear safety glasses, hearing protection, and appropriate clothing.
Avoid operating in trees or on unstable surfaces; maintain secure footing.
Be aware of spring back when cutting limbs under tension.
Understand kickback triggers and maintain a firm grip with proper stance.
How to engage and disengage the chain brake for safety.
Dangers and safety warnings before installing or replacing the guide bar and chain.
Adjusting chain tension until snug, then fully tightening bar mounting nuts.
Procedure for adjusting chain tension, including cold and warm chain checks.
Guidelines for sharpening chain cutters, including angles and rake clearance.
Procedures and precautions for charging the battery pack.
Warnings against operating in trees, on ladders, or under wet conditions.
Precautions to take to minimize the risk of kickback during cutting.
Separation of felling and bucking operations, and escape route planning.
Making the back-cut, leaving a hinge to control the tree's fall.
Awareness and handling of dangerous springloaded logs or branches.
Essential personal protective equipment and safe operating conduct.
Keep body parts away from the chain and maintain control during operation.
Proper hand placement and grip for effective control of the chain saw.
Wear safety glasses, hearing protection, and appropriate clothing.
Avoid operating in trees or on unstable surfaces; maintain secure footing.
Be aware of spring back when cutting limbs under tension.
Understand kickback triggers and maintain a firm grip with proper stance.
How to engage and disengage the chain brake for safety.
Dangers and safety warnings before installing or replacing the guide bar and chain.
Adjusting chain tension until snug, then fully tightening bar mounting nuts.
Procedure for adjusting chain tension, including cold and warm chain checks.
Guidelines for sharpening chain cutters, including angles and rake clearance.
Procedures and precautions for charging the battery pack.
Warnings against operating in trees, on ladders, or under wet conditions.
Precautions to take to minimize the risk of kickback during cutting.
Separation of felling and bucking operations, and escape route planning.
Making the back-cut, leaving a hinge to control the tree's fall.
Awareness and handling of dangerous springloaded logs or branches.
General| Battery Voltage | 40 V |
|---|---|
| Power Source | Battery |
| Type | Chainsaw |
| Bar Length | 16 inches |
| Chain Type | Oregon |
| Chain Gauge | 0.050 inches |
