2.6 Warehouse storage
In the event that the pedal-assist bicycle is required to be stored for long periods of inactivity,
the following operations must be carried out:
- Repair it in a dry and well-ventilated place.
- Carry out general cleaning of the pedal-assist bicycle.
- Remove the battery from its seat.
- Leave the bicycle on the stand.
- Protect exposed electrical contacts with antioxidant products.
- Grease all surfaces not protected by paints or anti-corrosion treatments.
Guards
Therefore, it is strictly forbidden to modify or remove the battery and chain guards, etc., as well
as the warning and identification plates.
DANGER
05
To Next Page
Loading...
