EasyManua.ls Logo

screwfix BI60DISHUK - Rinse Aid Usage and Indicator; Using Rinse Aid; Optical Rinse Aid Indicator

screwfix BI60DISHUK
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
IMPORTANT: ALWAYS USE DISHWASHER COMPATIBLE RINSE AID.
Only use rinse aid designed for dishwasher use. Never ll the rinse aid dispenser with any other substances,
for example, vinegar, dishwasher cleaning agent etc. as this will cause damage to the appliance and will
invalidate your guarantee.
Optical Rinse Aid Indicator
In addition to the Rinse Aid indicator on the control panel, you can also judge the level of rinse aid in the
container using the optical indicator on the detergent panel inside the door.
When the Rinse Aid container is full, the optical indicator will show as a complete dark dot. As the rinse aid
diminishes, the size of the dark dot will decrease. It is recommended that you rell with rinse aid when the
container is no lower than 1/4 full.
Optical Indicator Settings
Full
3/4 full
1/2 full
1/4 full - rell the rinse aid container
Empty
Filling the Rinse Aid Dispenser
1 2 3
The rinse aid dispenser is located inside the door on the detergent panel.
To open the dispenser, turn the cap anti-clockwise 90° and remove it (see picture 1).
Carefully pour the rinse aid into the container using the Optical Rinse Aid indicator to guide you (see picture 2).
When the indicator is completely dark, the container is full; do not overll.
Replace the cap ensuring the arrows are aligned and turn it clockwise 90° to lock into place (see picture 3).
IMPORTANT: SOAK UP ANY SPILT RINSE AID WITH A DAMP ABSORBENT
CLOTH TO AVOID EXCESS FOAMING DURING THE NEXT WASH CYCLE.
5059340445762_MNL_IN_V10.indb 605059340445762_MNL_IN_V10.indb 60 31-03-2022 16:01:3331-03-2022 16:01:33