Operation & Maintenance Manual──LG918 Wheel Loader
25
z Follow the direction in CHAPTER III – 3.5.2 (7) Towing, a dangerous contion may be
caused by using the wrong method.
z Wear gloves to deal with a tightwire.
z Before preparation for the towing confirm the signals with other people.
z Please contact Shandong Lingong Construction Machinery Co. Ltd. or their accredited
representative if the engine does not start or the brake system has problems.
z Please tow the machine on level ground; it is dangerous to tow on a ramp.
z If a disabled machine is towed by an other machine,
the tightwire should be strong enough to pull the
weight of the towed machine. The tightwire with
wring or radius reduction can not be used.
z People are not allowed to go between two
machines when the machines are connected.
z Do not stand on the towing steel wires or
tightwires.
z Keep the hook of the towing machine and the towing parts in a horizontal line.
6 SAFETY OPERATION
6.1 Keep Good Operation Habits
z Always be seated with the safety belt locked during
operation. The machine in operation should always
be controlled by the operator.
z Operate the control lever of the working equipment
properly to prevent misoperation.
z Examine and listen to the exceptions carefully, and
report immediately. Do not repair while in operation.
z An overload is dangerous. Shandong Lingong
Construction Machinery Co. Ltd assumes no
resposibility for the injury or damage induced by
overload.
To Next Page
Loading...
Need help?
General
