Operation & Maintenance Manual──LG918 Wheel Loader
31
8 SAFETY EXAMINATION AND REPAIR
8.1 General Knowledge
z Operation and maintenance people should be trained
to become the licensed. Do not allow anyone to enter
the working area except the maintenance people. If
necessary, please assign people to guard.
z The repair of the machine should follow the
procedures. Ask the Shandong Lingong Construction
Machinery Co. Ltd. for help if you don’t know how
to do the repair.
z Assure that the people who are responsible for
repairs, who decide the working procedures, who
determine the person in charge and repair the
machine have been trained to, assemble and
disassemble the parts step by step.
z Please wear a uniform with a tight wristband and
trousers. Always wear safety glasses.
z Please use the repair tools correctly; do not use broken or low quality tools.
z Lower the working equipment completely to the ground, stop the engine, push the parking brake
switch, and wedge the tire during repairs to prevent bodily injury.
z Obey the rules of warning labels. Pay attention to the important notices on the label on the
machine and obey the rules. Add a new one or clean the label if it is lost or dirty.
z Attach the label of “No Operation” or other warning label to the switches or control board
during repairs. Never let other people operate or start the engine to prevent injury or death.
z Fuel, mobile oil, grease and an oily cloth are dangerous materials which should be kept away
from fire or flame. Do not pile oily cloths anywhere
because it may self-ignite.
z Never smoke when adding fuel or examining the
storage battery.
z Put the accessories in a safe place to prevent lost. Put
the handrail around and put the “No Enter”warning
label to prevent people from entering without
permission.
To Next Page
Loading...
Need help?
General
