Operation & Maintenance Manual──LG918 Wheel Loader
32
z No people are allowed to get close to the machine or accessories without permission.
z Keep the working area clean and tidy, without flammable materials around to prevent fire or
slippage.
z Lock the front and rear frames with a safety bar to
prevent rotation before examination and repair.
z Make sure all the levers (or handles) are in the
neutral position and use the necessary equipment to
support the life-arms cylinder and tilting oil cylinder
to prevent the working equipment from falling if you
have to examine and repair when the bucket is
lifting.
8.2 Working in a Close Area
Exhaust gas from the engine may cause disease or death. If working in a close area, use releaser to
release the exhaust gas in the area. If there is no releaser, please open the door.
8.3 Maintenance of frames during jacking up
z When jacking up the frame, do not let anyone enter the other side of the frame.
z Before jacking up, lock the front and rear frames with a safety bar and put all the levers (or
handles) in the middle and wedge the tire from the opposite side. Put the cushion blocks under
the machine.
8.4 Working under the Machine
z Park the machine on firm ground. Lower the working equipment to the ground before working
under the machine.
z Wedge the tire firmly.
z It is dangerous to work under the machine only using
the working equipment to support the machine.
z Never work under the machine without good
support.
8.5 Working on the Machine
z Make sure the top of the machine has no blockage and is clean when working on the top of the
machine. Follow the rules below:
To Next Page
Loading...
Need help?
General
